Removing the sensor board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the battery.
3
Remove the
4
Remove the
5
Remove the
Procedure
CAUTION: Place the display-panel assembly on a soft and clean
surface to avoid scratching the display.
1
Open the latch and disconnect the sensor-board cable from the sensor
board.
computer. After working inside your
base
cover.
wireless
card.
display
assembly.
display
panel.
After working inside your
85