Error Signals - Olympus P-S100 User Manual

Doya_E.book Page 33 Thursday, November 11, 2004 10:50 AM

Error signals

Indicator
Indicator
status
POWER On
Off
ACCESS On*
Blinking
slowly
Blinking
very slowly
PAPER Blinking
slowly
RIBBON Blinking
slowly
ACCESS and Blinking
PAPER together
ACCESS and Blinking
RIBBON together
ACCESS, RIBBON, Blinking
and PAPER together
* This light goes off when the connection is complete.
Printer status
Power ON
Power OFF
Connected to a Wait for a while. Do not disconnect
digital camera, or
the digital camera or PC.
the printer is
cooling off
Communicating
Printing
Out of paper Replace the paper-in tray.
End of ink Replace the ribbon cartridge with a
ribbon new one.
No ribbon Set a ribbon cartridge into the printer.
cartridge is set
The paper and Use a ribbon cartridge for 100 × 148
the ribbon mm (4 × 6) printing when printing on
cartridge are 100 × 148 mm (4 × 6) papers, and use
incompatible a ribbon cartridge for 89 × 127 mm
(3.5" × 5") printing when printing on
89 × 127 mm (3.5" × 5") papers.
Paper jam Remove jammed paper.
Communication Check whether the digital camera
error supports PictBridge.
Turn the printer off and on, then try
printing again. If the error persists,
contact an authorized Olympus
service center.
Internal problem Contact an authorized Olympus
service center.
Error signals
Solution Page(s)
–
–
22, 32
19, 32
18
–
–
19
21
36
–
–
–
EN-33