Plugging In To An Outlet And Turning The Printer On/Off - Olympus P-S100 User Manual

Doya_E.book Page 18 Thursday, November 11, 2004 10:50 AM

Plugging in to an outlet and turning the printer on/off

Preparation
Plugging in to an outlet and turning the printer on/
off
1
Plug the power cord into the AC adapter.
2
Plug the power plug into a wall outlet, and then plug the DC plug into the DC-IN jack.
DC plug
3
Press the POWER button.
The POWER indicator turns on.
Note
If the DC plug is accidentally unplugged from the printer during printing, turn the printer off, plug the DC plug into
the DC-IN jack, and then turn the printer on again. Leaving the printer unplugged may cause it to malfunction.
To turn off the printer
Press the POWER button.
The POWER indicator turns off.
EN-18
Insert the power cord plug
into the wall outlet.