Service Procedures - Body - Panasonic MC-UL424-00 Service Manual

MC-UL424-00 / MC-UL426-00

3 SERVICE PROCEDURES - BODY

3.1. Motor
3.1.1. Removal
1. Remove nozzle hose from body by (1) pressing in locking
tab and (2) sliding up and out of retaining slot.
2. Remove two (2) screws from rear of vacuum cleaner.
3. Remove dust bin.
4. Remove three screws from front of vacuum cleaner.
5. Press inwards on the sides in area shown to release tabs
on the motor cover.
6. Lift off motor cover.
7. MC-UL424 ONLY: Remove lower plate (See Lower Plate -
Removal).
8. MC-UL424 ONLY: Remove agitator (See Agitator -
Removal).
9. MC-UL424 ONLY: Remove nozzle by (1) raising non-belt
side and (2) sliding nozzle off the motor shaft.
It is not necessary to remove the nozzle on model MC-
UL426 to access the suction motor.
16