Modem Setup; Installing The Ci Card; Teletext Decoder - Samsung LE32R7 Owners Instrucitons

installing the Ci card

teletext decoder

4.7 Modem Setup
I f you want to setup Modem, please follow the instruction below.
• Select "Tone" or "Pulse" in Dial Method.
• Select the "Carrier Wait Time" ranged in ~255 seconds
with the 3/4 buttons or numeric buttons.
• Select the "Carrier Present Time" ranged in 0.~25.5 seconds
with the 3/4 buttons or numeric buttons.
• Select the "Carrier Loss Time" ranged in 0.~25.5 seconds
with the 3/4 buttons or numeric buttons.
• Select Blank, 0, # or 9 in "Prefix" by using 3/4 buttons,
to specify your pre-dialing button for phone extension.
• Press 'enter/oK
exit without enter/oK
1. Purchase the CI CAM module by visiting your nearest dealer or by phone.
2. Insert the CI card into the CAM in the direction of the arrow until it fits.
3. Insert the CAM with the CI card installed into the common interface slot.
Insert the CAM in the direction of the arrow, right up to the end so that it is parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
You can install the CAM anytime whether the TV is ON or OFF.
Most set channels carry " teletext ", pages of written information that
provide information such as:
T elevision programme times.
N ews bulletins and Weather forecasts.
S ports results.
S ubtitles for the hard of hearing.
The teletext pages are organized according to six categories:
Part
a
B
C
d
e
F
English-28
' to save Modem configuration if modified.
button makes Modem Setup unchanged.
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status.
Date and time.
Text.
Status information.