Olympus DM 620 Detailed Instructions page 33

Settings relating to Recording
Select whether or not the
[Mic Select]
built-in center microphone is
(☞ P.53)
to be turned On or Off.
[Mic Sense]
Sets the recording sensitivity.
(☞ P.53)
[Rec Mode] Sets the recording rate for
(☞ P.54) each recording format.
You can configure whether
[Rec Level] to adjust the recording level
(☞ P.54) automatically or to adjust it
manually.
[Zoom Mic] Sets the directivity of the
(☞ P.55) builtin stereo microphone.
This function can reduce
[Low Cut Filter] noise from air conditioners,
(☞ P.55) projectors and other similar
noises.
Sets the threshold level for
[VCVA]
the Variable Control Voice
(☞ P.55)
Actuator (VCVA).
[V-Sync. Rec] Sets the start level for voice
(☞ P.56) sync recording.
[Timer Rec]
Sets timer recording.
(☞ P.70)
Sets the recording settings
[Rec Scene]
which matches the recording
(☞ P.58)
condition or environment.
Select whether or not to
[Rec Monitor]
output the recording monitor
(☞ P.59)
sound from the EAR jack.
Pause
While the recorder is during
recording mode, press the REC (s)
button.
• [≠] will appear on the display.
• The recorder will time out after 120
minutes when left in [Rec Pause].
Resume Recording:
Press the REC (s) button again.
• Recording will resume at the point of
interruption.
To quickly check on the recorded contents
While the recorder is during
recording mode, press the `OK
button.
• [•] will appear on the display.
• Recording will stop, and the file that was
just recorded will be played back.
Recording
2
EN
33