Device Menu; System Info - Olympus VN-801PC Instructions Manual

Olympus microcassette recorder user manual
Hide thumbs Also See for VN-801PC:
Table of Contents

Advertisement

h Device Menu
Time & Date
If the current time and date is not correct, set it.
1 Select [Time & Date] from the menu on the

[Device Menu].

(please see "Setting time and date [Time & Date]"☞ P.3)
Reset Settings
This returns the functions back to their initial settings (factory default).
1 Select [Reset Settings] from the menu on the
[Device Menu].
Menu settings after setting reset (initial settings):
Rec Menu:
[Mic Sense]
[Rec Mode]
[VCVA]
[Rec Scene]
Play Menu:
[Play Mode]
[Play Area]
[Repeat]
Note:
• After resetting the settings, the time settings and fi le numbers will be preserved from before the
reset and will not return to their initial settings.
Format
If you format the recorder, all files will be removed and all function settings will return to defaults
except date and time settings. Transfer any important files to a computer before formatting the
recorder.
1 Select [Format] from
the menu on the [Device
Menu].
2 Press the + button to se-
lect [Start], and then press
the `OK/MENU button.
• After [Data will be cleared]
message is on for two seconds,
[Start] and [Cancel] will turn
on.
3 Press the + button again
to select [Start], and then
press the `OK/MENU but-
ton.
• Formatting begins and
[Format !] flashes on the
display.
• [Format Done] appears when
formatting ends.
Notes:
• It may take over 10 seconds to complete processing. Never remove batteries during this time
because data may be corrupted. In addition, replace the batteries with new ones in order to ensure
that the batteries will not run out while processing.
• Never format the recorder from a PC.
• When the recorder is formatted, all the saved data, including locked fi les and read-only fi les, are
erased.
• After formatting, recorded audio fi le names may start from [0001].
• When returning the settings for the functions to their initial settings, use [Reset Settings].

System info.

You can check the recorder's information on the
menu screen.
1 Select [System info.] from the
menu on the [Device Menu].
[Model] (Model Name), [Version] (System ver-
sion) and [Serial No.] (Serial Number) appears
on the display.
[High]
[192 kbps]
[Off]
[Off]
[File]
[Off]
-
[Skip Space]
[Forward Skip]
[Reverse Skip]
LCD/Sound Menu:
[Font Size]
[Contrast]
[LED]
[Beep]
[Language(Lang)]
-
14
[File Skip]
[File Skip]
[Large]
[Level 06]
[On]
[On]
[English]

Advertisement

Table of Contents
loading

Table of Contents