Settings - Denon DBT-1713UD Owner's Manual

Video Settings
Sets up TV connection, HDMI connection, and 3D video software playback.
TV
Set the video output signal according to the connected TV.
Setting items
16:9 Squeeze Auto : Outputs to a wide screen TV. For 4:3 video, displays
Aspect Ratio
Set the screen type and in the center of the screen without changing the aspect ratio.
display mode of the TV. WIDE (16:9) : Outputs to a wide-screen TV.
Wallpaper Picture : Displays the DENON logo.
Setting for displaying the Black : Sets the background to black.
background when playback Gray : Sets the background to gray.
is stopped. Blue : Sets the background to blue.
Progressive Mode Auto : Detects the type of video material and automatically switches the
Sets an appropriate mode. Normally, this setting is used.
progressive conversion Video : Suitable for playing video material discs.
mode for the source video Film : Suitable for playing film material discs.
material.
HDMI
Set the HDMI output signal.
Setting items
Color Space YCbCr : Outputs using the color difference video system (16 (black) to
Sets the video signal system 235 (white)).
to be output from HDMI. RGB Normal : Outputs using the RGB video system (16 (black) to 235
(white)).
RGB Enhanced : Outputs using the RGB video system (0 (black) to 255
(white)).
HDMI Deep Color Auto : Deep Color is automatically output when the connected HDMI
Sets the HDMI terminal to device supports Deep Color.
output Deep Color. Expands Off : No Deep Color output.
the color depth (number of
used colors) of the HDMI
video signal, enabling
playback with more natural
colors and free of streaking.
Downloaded From DvDPlayer-Manual.com Denon Manuals
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
DVD
3D
Set up 3D video software playback.
Setting items
3D Output Auto : Automatically determines whether the video software is 3D or 2D
Sets up video outputs for and plays it back. When you play 3D video, 3D and 2D video parts are
3D video playback. played back as 3D and 2D, respectively. Normally, use this setting.
Off : Always outputs 2D video signals.
uio p
Screen Size
Use
Sets up the screen size of
screen size of your TV in the setting screen, and
your 3D enabled TV. ENTER
press
• The default setting is "046" (46" TV screen
size).
NOTE
Set up the correct size, otherwise you may not be
able to view 3D video properly.
3D video playback operations may differ according to the disc to be used.
Refer to the instruction manual supplied with your disc.
NOTE
• When passing 3D video signals output from this device through an AV receiver to a 3D enabled TV, the
AV receiver must also be compatible with inputting / outputting 3D video signals.
• To view 3D video, use a 3D enabled TV.
• During 3D playback, you cannot adjust "Video resolution"
quality (Picture control)" (vpage 27).
40
Default settings are underlined.
Setting details
0 9
or – to enter three digits for the
for confirmation.
(vpage 26) or "Adjusting the picture