Video Resolution - Denon DBT-1713UD Owner's Manual

Video resolution

This section is for making the settings for video output resolution. Set them depending on the connected
television.
Press VIDEO RESOLUTION .
• The resolution is changed as shown below each time
pressed.
• The default settings is underlined.
Source Direct
Auto
(Auto) (Source direct)
1080P24
(1080 progressive, 24-frame) (1080 progressive)
Downloaded From DvDPlayer-Manual.com Denon Manuals
VIDEO RESOLUTION
is
480/576i
(480/576 interlaced) (480/576 progressive)
1080i
1080P
(1080 interlaced) (720 progressive)
DVD
• If the video resolution is not set to "Auto", set it to correspond with the resolution of your television.
• Images will not be projected normally if the television resolution and this unit's output resolution do not
match.
• Audio and video will be temporarily interrupted if the power of the connected device currently playing is
turned off, or the input is switched.
• When you change the video resolution of the unit, it takes a few seconds up to about 10 seconds for
validation between the unit and the connected device. Audio/video is not output during this period.
480/576P
720P
26
Settings enabled during playback