Water Button Assmebly; Duct Door Replacement; Display Pcb; Ice Button Assembly - LG LFX23961SW /01 Service Manual

4) If nozzle is interfered with button,
push and pull out the bottom of button
CAUTION: When replacing the dispenser cover in the
reverse order of removal, be careful that the lead wire
does not come out and the water tube is not pinched by
the dispenser.

3-12 DISPLAY PCB

As shown below, remove 1 case PCB fixing screw
Remove the display PCB fixing screw.
Case, PCB

3-13 ICE BUTTON ASSEMBLY

1) Remove the screw fixing the button lever.
2) Push the spring from the hanging hook to remove it.
3) Apply some pressure to the rib in direction and lift the
button in direction.
Button Lever

3-14 FUNNEL REPLACEMENT

Pull down and forward
5) Remove the
connected part of
lead wire.
Display PCB
1
2
- 11 -

3-15 WATER BUTTON ASSMEBLY

1) Remove screws.
2) Grasp the Button assembly and lift up.
Button Lever

3-16 DUCT DOOR REPLACEMENT

1) Pull up and out on the dispenser cover to remove.
2) Disconnect the wire harness.
3) Remove the funnel
4) Replace in reverse order.

3-17 ICE CORNER DOOR REPLACEMENT

1) Loosen the front screw as shown in the picture.
2) Lift up the hinge with one hand.
3) Pull out the Ice Corner Door with the other hand.
Hinge