Door Gasket Removal - LG LFX23961SW /01 Service Manual

3-2 REMOVING REFRIGERATOR HANDLE
1.Removing Refrigerator Handle
• Loosen the set screws with the 3/32" Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a 1/4 "
Allen wrench.
Mounting
Fasteners
3-3 REMOVING FREEZER HANDLE
2.Removing Freezer Drawer Handle
• Loosen the set screws located on the lower
side of the handle with the 3/32 " Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners
need to be tightened or removed, use a 1/4"
Allen wrench.
Set Screw
Allen Wrench

3-4 DOOR GASKET REMOVAL

1. Remove door frame cover
Starting at top of cover and working down, snap cover
out and away from door.
Frame Cover
2. Remove gasket bracket clips
There are two clips on each door. Start bracket removal
near one of the middle clips.
1) Pull gasket back to expose gasket bracket clip and
door frame.
2) Insert a flat tip screwdriver into seam between gasket
bracket and door frame and pry back until clips snap
out.
3) Continue prying back along seam until all clips snap
out.
Door
Frame
Flat Tip
Screwdriver
3. Remove gasket
Pull gasket free from gasket channel on the three
remaining sides of door.
- 7 -
Handle
Gasket
Bracket Clip
Gasket
Bracket