Table of Contents
Advertisement
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Channel Scanning
This function can scan the frequency activity from other radios.
The operation steps are as follows:
1. In channel mode, press key"*"for more than 2s, it can scan according to the channel you setted.
2. Press key ▲ or ▼ to change the direction of scanning.
3. Press any key to confirm after scanning the signal.
NOTE
!
⊙
Scanning mode see Menu No.18
Automatic Search FM Radio（FM）
This function can automatically search the FM radio frequency.The frequency range is from
65-108MHz
The operation steps are as follows:
1. In frequency or channel mode, tap call key, the LCD displays:
2. Repeatedly press "*" key can automatically search the FM radio frequency.
3. Tap call key to exit FM.
!
NOTE
⊙
When listening to the radio, the frequency or channel of A/B receiving signal will automatically switch to
the frequency or channel state, and when normal transmit and receive signal disappears it will
automatically switch to FM state. Manually search see Menu 42.
FM
100.700
49
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
Search CTCSS/DCS Code
Using this function may search and store the CTCSS/DCS code from other radios when in same frequecy.
Example: CTCSS code scanning; the transmitting frequency is 465.255MHz，CTCSS is 88.5Hz
The operation steps are as follows：
1. In frequency mode, press Menu+11, the LCD displays:
2. Press key Menu, the LCD displays:
3. Press key "*", the LCD displays:
4. When other radio transmits, the LCD displays:
has entered scanning condition.
5. The CTCSS will in turn and fast move from 67.0-254.1MHz.
6. After searching the CTCSS code, the radio will beep and stop scanning.
7. After setting, press key MR/VFO to confirm and store, otherwise press key PTT or Exit to standby.
NOTE
!
⊙
1. The operation steps of DCS scanning is the same with CTCSS, except that it needs to press
Menu+10 to enter scanning. 2. If CTCSS have not searched the code, you can search DCS mode.
Cursor"▲" Conversion（A/B）
Directly taping AB key can move the cursor up and down, you can modify or confirm the
parameters of the frequency and channel where the cursor is.
High/Low Power Fast Conversion
In channel mode, tap "#"key to shift between high and low power.
50
FUNCTION OPERATION AND DESCRIPTION
R-CTCS
11
OFF
R-CTCS
11
OFF
R-CTCS
11
OFF
R-CTCS
11
,CT ▲glitter means the radio
CT
OFF
Hide quick links:
Advertisement
Table of Contents
