Ptt Id Prolong Time（Ptt-Lt - QuanSheng TG-45UV User Manual

FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
PTT ID Prolong Time（PTT-LT）——Menu No.20
This function is to set the prolong time of sending the radio's PTT-ID.
The operation steps are as follows:
1. In frequency or channel mode，press Menu+20, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
(There are 0-30ms to choose)
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
NOTE
!
⊙
Select "0" in normal use to avoid affecting the radio.
A Channel Display Mode（MDF-A）——Menu No.21
This function is to set the display mode of channel A.
The operation steps are as follows:
1. In standby mode press Menu+21, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
Display modes：① FREQ：Frequency + Channel No.
CH-OO3
② CH: Channel No.
136.225
③ NAME：Channel Name
3. After setting, press key Menu to confirm, and then press key
PTT or Exit to standby.
20
PTT-LT
0
20
PTT-LT
1
21
MDF-A
FREQ
21
MDF-A
CH
400.875
3
!
NOTE
136.225
4
⊙
Channel name must be set
4
ABC
by program software. It can
136.225
4
edit any three numbers or
characters.
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION（The following description is without
voice prompt.）
B Channel Display Mode（MDF-B）——Menu No.22
This function is to set the display mode of channel B.
The operation steps are as follows:
1. In standby mode, press Menu+22, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
Display modes： ① FREQ：Frequency + Channel No.
② CH：CH:
③ NAME：Channel Name
3. After setting, press key Menu to confirm,and then press key PTT
or Exit to standby.
Busy Channel Lock（BCL）——Menu No.23
When this function is on, it may prevent other radios'interference. If the selected channel or
frequency is being used by other radios, when you press key PTT, the radio you use can not transmit,
It can transmit only when the station can not receive any signals.
The operation steps are as follows:
1. In standby mode, press Menu+23, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose, the LCD displays:
ON：ON OFF: OFF
3. After setting, press key Menu to confirm, and then press key PTT or Exit to standby.
33 34
FUNCTION OPERATION AND DESCRIPTION
22
MDF-B
FREQ
MDF-B
CH
400.875
3
136.225
4
400.875 3
CH-004
NOTE
400.875 3 !
ABC
⊙
Channel name must be set
by program software. It can
edit any three numbers or
characters.
23
BCL
OFF
23
BCL
ON
22