Table of Contents
Advertisement
8.
Next. reboot the Player for the new setting to take effect. Select the Power option on the left menu tree (FIG. 12).
Live View - Power Option
FIG. 12
9.
Select Hard Reset at the top off the page and wait for the Player to reboot. As-Run Logging is now enabled.
NOTE: .Mov f iles will no longer play following the reboot.
Using Two Monitors with the IS-XPT-2100
The two HDMI output ports on the rear panel of the IS-XPT-2100 provide the ability to send HD video output to two displays. If
connecting two displays, use two HDMI cables to connect each HDMI connector to a display device. Some basic configuration is
required when using both HDMI outputs:
1.
Connect a USB mouse and keyboard to the Player
2.
Press Alt-F4 to stop playback on the Player (if necessary).
3.
Right click on the desktop and select Graphics Properties (FIG. 13):
Select Graphics Properties
FIG. 13
4.
In the Intel HD Graphics Control Panel, select Displays > Multiple Displays (FIG. 14):
Select Multiple Displays
FIG. 14
IS Expert 2100 Installation Guide
Select Hard Reset
Select Power to Reset
IS-XPT-2100 Player Configuration
11
Advertisement
Table of Contents
