Advertisement
7
Glue the wood pieces together to form
two wood blocks.(Remarks: the hight of
the wood block is depend on what heli
you use.)
9
Put the frame into the Case.
11
Stick the tail like the picture.
8
Stick the Wood pieces under the Body.
(Hex Put the frame into the Case.
Cap Screw2x20mm x4;washer ￠3.2x
￠8x0.5mm x4)
10
Put the Sponge inside the tail.
12
Stick the wood pieces under the center
of the body.(Combination self-Tapping
Screw2x16mm x4).
5
Advertisement
