Advertisement
homes or crowds of people.R/C aircraft are prone to accidents,failures,and crashes due to a
variet of reasone including,lack of maintenance,pilot error,and radio interference.pilots are
responsible for their actions and damage or injury occurring during the operation or as of a
result of R/C aircraft models.
600scale fuselge,suitable for T-REX600 Nitro Helicopter series
BEFORE ASSEMBLING
1:Check for all the parts in the
list come with the manual.
2:Some basic tools are needed
to help the assembly.
1:Landing Gear x4
4:Self-Tapping Screw T3x10mm x4
7:Combination self-Tapping Screw 3x16mm x2 8:Wood pieces
10:Hex Cap Screw 3x20mm x4
13:Taillight cover
18:Horizontal Stabilizer
21:Combination self-Tapping Screw 2x5mm x2
23:Hex Cap Screw 3x35mm x2
2:Skid Pipes x2
5:Transmitter support frame x2
11:Sponge x1
14:Headlight cover
19:Vertical Stabilizer x1
24:Antenna x1
TOOL
1:Cutter knife. 2:Hexagon screw
driver
3:Phillips screw driver. 4:File.
5:Diagonal cutting pliers.6:Silicone
7:CA glue. 8:AB glue 9:Fine
sandpaper.
10:Scissors.
15
16
9:washers ￠ 3.2x ￠ 8x0.8mmx4.
12:Combination self-Tapping Screw 3x16mm x4
15:Doll1
16:Doll2
20:Small Vertical Stabilizer x2
22:Washer ￠ 3.2x7x0.5mmx4
3
17
3:Set screw M3x4 x4
6:Transmitter
17:Seat
Advertisement
