Cutting Depth; Guide Fence - MK Diamond Products MK-60 Owner's Manual & Operating Instructions

MK-60 SAW
SETTING THE CUTTING DEPTH
(A)
Flip the Cutting Depth Set Lock
up to the unlocked position.
NOTE: 1. If possible we recommend that the cutting depth is set approximately 2 mm deeper
than the material thickness. This should help to ensure you achieve a clean cut.
SETTING THE GUIDE FENCE
(A)
Release the guide fence lock
screw on the base plate.
(B)
Move the Cutting Depth Set
Lock to the desired position on
the Cutting Depth Scale.
(B)
Set the guide fence in the guide
fence slot.
16
OPERATION
(C)
Flip the Cutting Depth Set Lock
down to the locked position.
(C)
Set a desired width and retighten
the lock screw for the guide
fence.