Registering A Handset; Restore Default Settings - Panasonic KX-TGB110E Operating Instructions Manual

Registering a handset

Note:
Handset batteries must be fully
charged before registration. Hold the
handset close to the base during the
registration process.
Handsets that were supplied with the
base are already pre-registered.
On the base:
1
Press and hold
seconds. The base will remain in
registration mode for 90 seconds.
On the handset:
2
If the handset is not register to a
base, press
L
the 4 digit PIN code (default =
0000), press
3
If the handset is already register
to a base, press
"ADVANCED SET", press
d
4
"REGISTER", press
L R
5
Enter the 4 digit PIN code (default
= 0000), press
A beep will be heard if the registration
is successful. The handset is
automatically assigned an available
handset number. Use this number
when making internal calls.
Note:
If registration is not successful the
first time, please repeat the process
again in case the base registration
period ran out of time. If the base
is not found after a few seconds,
the handset returns to standby. Try
registering again.
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
for 5
L R
p
m
m
and then enter
R
m
m
L R .
m
d
,
L R L
m
L
L
L R .
De-register a handset
Available for: KX-TGB112
m
Use one handset to de-register
another. The handset being used
cannot de-register itself.
m
1
L R ,
SET", press
d
2
"UNREGISTER", press
L R
.
L R
3
Enter the 4 digit PIN code (default
= 0000), press
d
4
L R to select the handset that
needs to be de-registered. A
confirmation beep will be heard
and the display will return to the
previous menu.

Restore default settings

The phone can be restored to its
default (original) settings. All the
R
handsets that are registered to the
.
R
base will be retained.
.
R
IMPORTANT
Resetting the phone to its default
settings will delete all entries in the m
Calls list. Current handset and base
settings will also be reset. Entries
stored in the phonebook are retained.
1
L R ,
m
SET", press
d
2
"RESET", press
L R
3
The display shows "RESET ?".
4
to confirm or
L R
to the previous menu. The phone
will restart automatically.
Programming
m
d
"ADVANCED
L R
.
L R
m
L R .
m
m
d
"ADVANCED
L R
p
.
L R
.
L R
to return
L R
27