Advertisement
Pneumatic Straight Grinder, SG-6K
Operation and Maintenance Guide
Clean all parts in suitable solvents. Examine them for wear and tear. Replace any damaged components. Coat
parts with light oil and re-assemble carefully in reverse sequence.
LUBRICATION REQUIREMENTS :
Always install a line lubricator on the air line as close to the tool as possible. A filter-regulator lubricator unit (FRL) is
strongly recommended. Keep the lubricator bowl topped up with recommended grade of oil and check that the oil is
reaching the tool. Running the tool without lubrication is likely to cause damage to the components causing
premature replacement.
RECOMMENDED LUBRICANTS :
ABOVE 27
SHELL
Toona R. 72
MOBIL
Almo 529
ESSO
-----
CALTEX
Rando Oil 100
CP
-----
TEXACO
Regal oil F (R&O)
DALTRON
Silkolene 881
BURMAH
Castrol RD Oil 3
CASTROL
DUCKHAM
Garnet 7
STERNOL
Merlin 87
PETROFINA
Purifoc 53
CHEVRON
Vistac Oil 18X
IND OIL
Servo Spyn – 22
TECHNICAL DATA:
Maximum wheel size
Air inlet pressure
Hose inside dia
Air Inlet
Free speed
RPM on load
Air consumption
Power
Weight
INTENDED USE :
This grinder is rugged & dependable tool to give you years of satisfactory service. It is generally used for finishing
welding seam, cleaning of burrs in castings, and for rough hand grinding. It is also used for repair of metal structure.
PROHIBITIVE USE
Straight Grinder is prohibited to be used from purpose other than mentioned in intended use.
Following safety precautions should be taken
. Wear appropriate personal protective equipments.
. Do keep hand & clothing away from moving parts.
. Straight grinder should be stored in dry environment.
. Do not allow the equipment to run unattended.
. Do not modify this equipment.
. Do not use petrol (gasoline) thinners or any other high flash point solvent to clean the equipment.
. Please check the hose connection prior to starting the Straight grinder.
Sheet 3 of 5
0
0
0
0
C - 80
F
5
C-27
C
Toona R. 41
Almo 527
Arox.EP.65
Rando Oil 100
-----
Regal Oil PE (P&E)
Silkolene 548/T
Castrol Rd Oil Light
Garnet 6
Merlin 71
Purifoc 46
Vistac Oil 19X
-----
:- 150mm dia
:- 90 psig
:- 16mm
:- 3/8" BSP
:- 6000 rpm
:- 3000 - 3500
:- 26 cfm
:- 1.10 watts.
:- 3.5 Kgs.
0
0
40
F-80
F
BELOW 5
Toona R.27
Almo 525
Arox EP.45
Rando Oil 46
Airolene Tool Oil
Regal Oil PE (R&O)
Silkolene 733
Megna SPX
Zero Fio 5
Merlin 54
Purifoc 32
Vistac Oil 9X
-----
0
0
C
40
F
FF - MM - 75 REV - 0
Advertisement
