Table of Contents
Advertisement
Table of Contents ........................1
Usage Notice ...............................2
Safety Information .......................................
Precautions .................................................
Eye Safety Warnings ...................................
Introduction .................................7
Package Overview ......................................
Product Overview ........................................
Main Unit ..........................................................8
Connection Ports .............................................9
Remote Control ..............................................10
Installation .................................11
Connecting the Projector ...........................
Connect to Computer/Notebook ................
Connect to Video .......................................
Connect to 3D Video Devices ...................
Using the 3D glasses ................................
Powering On/Off the Projector ..................
Powering On the Projector .............................16
Powering Off the Projector .............................17
Warning Indicator ...........................................17
Adjusting the Projected Image ..................
Adjusting the Projector's Height.....................18
Adjusting the Projector's Zoom / Focus .........18
Adjusting Projection Image Size ....................19
User Controls ............................20
Remote Control .........................................
On-screen Display Menus .........................
How to operate ..............................................22
Menu Tree .................................................
IMAGE ...........................................................25
IMAGE | Advanced ........................................27
IMAGE | Advanced | PureEngine ...................28
IMAGE | Advanced | Color Settings ...............29
DISPLAY ........................................................31
DISPLAY | 3D ................................................33
SYSTEM ........................................................35
SYSTEM | Lamp Settings ..............................37
Downloaded From projector-manual.com Optoma Manuals
Table of Contents
SETUP ...........................................................38
SETUP | Signal -RGB Source........................40
SETUP | Signal -Video Source ......................41
2
Appendices ................................42
3
Troubleshooting .........................................
6
Image Problems .............................................42
Other Problems ..............................................44
7
Remote Control Problems .............................44
8
LED Lighting Messages .................................45
On Screen Messages ....................................46
Replacing the Lamp ..................................
Compatibility Modes ..................................
List .............................................................
11
RS232 Pin Assignments ................................52
11
RS232 Protocol Function List ........................53
12
Ceiling Mount Installation ..........................
13
Optoma Global Offices ..............................
15
Regulation & Safety Notices ......................
16
FCC Notice ....................................................59
18
20
22
23
42
47
49
52
56
57
59
1
English
Advertisement
Table of Contents
Related Manuals for Optoma HD3300
Summary of Contents for Optoma HD3300
-
Page 1: Table Of Contents
Menu Tree ..........IMAGE ............25 IMAGE | Advanced ........27 IMAGE | Advanced | PureEngine ....28 IMAGE | Advanced | Color Settings ....29 DISPLAY ............31 DISPLAY | 3D ..........33 SYSTEM ............35 SYSTEM | Lamp Settings ......37 English Downloaded From projector-manual.com Optoma Manuals... -
Page 2: Usage Notice
Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair. 7. Do not let objects or liquids enter the projector. They may touch danger- ous voltage points and short out parts that could result in fire or electric shock. -
Page 3: Precautions
When the lamp is approaching to the end of Warning- its life time, the message “Replacement sug- gested” will show on the screen. Please contact your local reseller or service center to change the lamp as soon as possible. English Downloaded From projector-manual.com Optoma Manuals... - Page 4 3D function. Even those without a personal or family history of epilepsy or ™ stroke may have an undiagnosed condition that can cause photo- sensitive epileptic seizures. English Downloaded From projector-manual.com Optoma Manuals...
- Page 5 Viewing in 3D may cause disorientation for some viewers. Accord- ™ ingly, DO NOT place your 3D PROJECTOR near open stairwells, cables, balconies, or other objects that can be tripped over, run into, knocked down, broken or fallen over. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 6: Eye Safety Warnings
When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen. ▀■ In order to minimize the lamp power, use room blinds to re- duce ambient light levels. English Downloaded From projector-manual.com Optoma Manuals... -
Page 7: Introduction
Power Cord 1.8m Due to different ™ applications in each Country, some regions may have differ- ent accessories. IR Remote Control 2 × AAA Batteries Documentation: User’s Manual Warranty Card Quick Start Card WEEE Card English Downloaded From projector-manual.com Optoma Manuals... -
Page 8: Product Overview
Introduction Product Overview Main Unit Lens Cap Ventilation (outlet) Power Socket Focus Ring Input / Output Connections IR Receiver Kensington Lock Port Ventilation (inlet) Zoom Ring Tilt-Adjustment Feet Zoom Lens English Downloaded From projector-manual.com Optoma Manuals... -
Page 9: Connection Ports
12V Trigger Relay (12V, 250mA) Lamp LED (Indicates the projector’s lamp status) Temp LED (Indicates the projector’s temperature status) Power Socket USB Service RS-232 Connector (9-pin) Kensington Lock Port Power LED (Indicates the projector’s status) Power Button English Downloaded From projector-manual.com Optoma Manuals... -
Page 10: Remote Control
Power On Power Off 16:9 Native PureEngine 3D Format Enter Re-Sync VGA Source Video Source HDMI 2 Source YPbPr Source HDMI 1 Source Menu Source Lamp Mode Contrast Brightness Mode Four Directional Select Keys English Downloaded From projector-manual.com Optoma Manuals... -
Page 11: Installation
DVI/HDMI Cable * plications for each country, some VGA Cable * regions may have USB Cable * different acces- sories. Emitter Cable * * Optional Acces- ™ 12V DC Plug * sory RS232 Cable * English Downloaded From projector-manual.com Optoma Manuals... -
Page 12: Connect To Video
RCA Component Cable for YPbPr * HDMI cable to VGA to RCA Component Cable for YPbPr * connect Blue-ray 3D player. Emitter Cable * * Optional Acces- ™ sory 12V DC Plug* Composite Video Cable * English Downloaded From projector-manual.com Optoma Manuals... -
Page 13: Connect To 3D Video Devices
(e.g. 3D broadcast using SBS mode) it may be necessary to use the projector’s 3D Sync-Invert option to optimize your 3D experience. The option is located in the “Display ->3D” section of the projector OSD menu. English Downloaded From projector-manual.com Optoma Manuals... - Page 14 Full 3D 1080p DLP® Projector All other product names, company names and trade names used herein are for identifications purposes only and may be trademarks or registered trademarks of their respective owners. All images have been simulated. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 15: Using The 3D Glasses
The option is located in the “Display” section of the projector OSD menu. To turn OFF 3D glasses: Press the “Power” button and hold until the LED switches off. For more detailed information, please refer to the 3D glasses user’s guide, or manufacturer's Website. English Downloaded From projector-manual.com Optoma Manuals... -
Page 16: Powering On/Off The Projector
3D SYNC 12V Trigger Out (5V) VGA YPbPr Pb B Pr R VIDEO SERVICE RS-232 POWER Turn on the ™ projector first and then select the signal sources. Power/Standby Lens Cap English Downloaded From projector-manual.com Optoma Manuals... -
Page 17: Powering Off The Projector
Warning Indicator When the “LAMP” indicator is lit orange, the projector will shut ™ down automatically. Please call the nearest Optoma facility for assistance. When the “TEMP” indicator turns red, it indicates the projector has ™ overheated. The projector will shut down automatically. -
Page 18: Adjusting The Projected Image
You may turn the zoom ring to zoom in or out. To focus the im- age, rotate the focus ring until the image is clear. The projector will focus at distances from 4.92 to 32.8 feet (1.0 to 10.0 meters). Focus Ring Zoom Ring English Downloaded From projector-manual.com Optoma Manuals... -
Page 19: Adjusting Projection Image Size
10.89 6.13 4.98 5.98 16.34 19.61 0.30 0.98 4.43 2.49 14.53 8.17 6.64 7.97 21.79 26.15 0.40 1.31 6.64 3.74 21.79 12.26 9.96 32.68 0.60 1.96 This graph is for ™ user’s reference only. English Downloaded From projector-manual.com Optoma Manuals... -
Page 20: User Controls
Press “3D Format” to switch between “Off” and “SBS”, use up/down button to switch to 3D Format “Top and Bottom” or “Frame Sequential then press “Enter” to confirm. English Downloaded From projector-manual.com Optoma Manuals... - Page 21 Press “VGA” to choose source from VGA/YPbPr connector. Press “YPbPr” to choose Component Video YPbPr source. Press “Video” to choose Composite video Video source. Four to select items or make Directional adjustments to your selection. Select Keys English Downloaded From projector-manual.com Optoma Manuals...
-
Page 22: On-Screen Display Menus
5. Press “Enter” or “Menu” to confirm, and the screen will return to the main menu. 6. To exit, press “Menu” again. The OSD menu will close and the projector will automatically save the new settings. Main Menu Settings Sub Menu English Downloaded From projector-manual.com Optoma Manuals... -
Page 23: Menu Tree
STD / Bright / Image AI Lamp Reset Cancel / Yes Exit Projection Test Pattern Off / Grid / White Pattern Background Color Dark Blue / Grey / Black 12V Trigger On / Off English Downloaded From projector-manual.com Optoma Manuals... - Page 24 (#1) “Color” and “Tint” are only supported in Video mode. ™ (#2) For HDMI model only. ™ (#3) For SurperWide is “Off”. ™ (#4) For SurperWide is “On”. ™ (#5) “3D Sync Invert” is only available when 3D is enabled. ™ English Downloaded From projector-manual.com Optoma Manuals...
-
Page 25: Image
User: User’s settings. Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image. English Downloaded From projector-manual.com Optoma Manuals... - Page 26 Press the ◄ to increase the amount of green in the image. Press the ► to increase the amount of red in the image. Sharpness Adjust the sharpness of the image. Press the ◄ to decrease the sharpness. Press the ► to increase the sharpness. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 27: Image | Advanced
The PureEngine is a collection of advanced image processing technologies that enhances the quality of the displayed image. Color Settings Press ► into the next menu and then use ▲ or ▼ to select item. English Downloaded From projector-manual.com Optoma Manuals... -
Page 28: Image | Advanced | Pureengine
Pure- processed by the PureEngine. Use this mode to check the adjust- Motion function ments that you make to the PureEngine settings. does not support this timing and will be gray out. English Downloaded From projector-manual.com Optoma Manuals... -
Page 29: Image | Advanced | Color Settings
Press ► into the next menu and then use ▲ or ▼ to select item. Use ◄ or ► to select Red, Green, or Blue for brightness (Gain) and contrast (Bias). Reset: Choose “Yes” to return the factory default settings for color adjustments. English Downloaded From projector-manual.com Optoma Manuals... - Page 30 User Controls Color Space Select an appropriate color matrix type from AUTO, RGB, RGB(0-255) RGB(16-235) or YUV. (*) For HDMI only. ™ English Downloaded From projector-manual.com Optoma Manuals...
-
Page 31: Display
DVD and HDTV film source) that support anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical resolu- tion are fully utilized. English Downloaded From projector-manual.com Optoma Manuals... - Page 32 On (16:9): Only 16:9 format can be selected. screen. On (2.35:1) Only 2.35:1 format can be selected. 4. Enjoy movies without black bars. Press ► into the next menu and then use ▲ or ▼ to select item. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 33: Display | 3D
SBS: Display 3D signal in “Side-by-Side” format. non-HDMI 1.4a Top and Bottom: Display 3D signal in “Top and Bottom” format. 3D timing. Press “Enter” to ™ Frame Sequential: Display 3D signal in “Frame Sequential” select 3D format. format. English Downloaded From projector-manual.com Optoma Manuals... - Page 34 ™ Press the “On” to invert left and right frame contents. function wouldn’t save the setting. Press the “Off” for default frame contents. It will set to “Off” when powers on and changes source. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 35: System
When selected, the image will appear reversed in upside down position “Test Pattern” ™ Test Pattern function will gray out when 3D Display a test pattern. There are Grid, White and Off. is on. English Downloaded From projector-manual.com Optoma Manuals... - Page 36 4:3 has been selected – this means that Trigger B will be active when the projector display mode is set to 4:3. The trigger will be inactive for all the other display mode options. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 37: System | Lamp Settings
2D and 3D. Image AI Image AI improves the contrast of the picture by optimizing the brightness of the lamp according to the picture content. Lamp Reset Reset the lamp life hour after replacing the lamp. English Downloaded From projector-manual.com Optoma Manuals... -
Page 38: Setup
Use this option to enable / disable input sources. Press ► into the next menu and then use ▲ or ▼ to select item. Press “Select (En- ter)” to finalize the selection. The projector will not search inputs that are de-selected. English Downloaded From projector-manual.com Optoma Manuals... - Page 39 Press ► into the next menu and then use ▲ or ▼ to select item. Reset Return the adjustments and settings to factory default values. Current: Reset current signal’s settings to factory default values. All: Return the settings for all menus to factory default values. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 40: Setup | Signal -Rgb Source
Frequency and Phase items are grayed out, and if Signal is not automatic, the Frequency and Phase items will appear for user to manually tune and saved in settings after that for next time projec- tor turns off and on again. English Downloaded From projector-manual.com Optoma Manuals... -
Page 41: Setup | Signal -Video Source
Adjust the color balance of red and green. Press the ◄ to increase the amount of green in the image. Press the ► to increase the amount of red in the image. Adjust measurement of composite video signals. English Downloaded From projector-manual.com Optoma Manuals... -
Page 42: Appendices
Image is too small or too large Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press “Menu” on the projector panel, go to “Display-->Format”. Try the different settings. English Downloaded From projector-manual.com Optoma Manuals... - Page 43 Check if the battery of 3D glasses is drained. Check if the 3D glasses is turned on. When the input signal is HDMI 1.3 2D (1080i side-by-side half), press “3D Format” button and switch to “SBS”. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 44: Other Problems
Make sure there are not any obstructions between the remote control and the projector. Move to within 6 m (20 ft) of the projector. Make sure batteries are inserted correctly. Replace batteries if they are exhausted. English Downloaded From projector-manual.com Optoma Manuals... -
Page 45: Led Lighting Messages
12V Trigger Out (5V) 3D SYNC 12V Trigger Out (5V) HDMI 1 HDMI 2 Pb B Pr R VGA YPbPr VIDEO SERVICE RS-232 Pb B Pr R VGA YPbPr VIDEO SERVICE RS-232 POWER POWER English Downloaded From projector-manual.com Optoma Manuals... -
Page 46: On Screen Messages
Appendices On Screen Messages Power down timer active: ™ Lamp warning: ™ Power off: ™ English Downloaded From projector-manual.com Optoma Manuals... -
Page 47: Replacing The Lamp
Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shat- ter and cause injury if it is dropped. English Downloaded From projector-manual.com Optoma Manuals... - Page 48 To replace the lamp module, reverse the previous steps. 8. Turn on the projector and do “Lamp Reset” after the lamp module is replaced. Lamp Reset: (i)Press “Menu” -> (ii)Select “System” -> (iii)Select “Lamp Settings” ->(iv)Select “Lamp Reset” -> (v)Select “Yes”. English Downloaded From projector-manual.com Optoma Manuals...
-
Page 49: Compatibility Modes
1280 x 768 WXGA-800 1280 x 800 1280 x 1024 SXGA 1280 x 1024 SXGA+ 1400 x 1050 UXGA 1600 x1200 1920 x 1080 HD1080 1920 x 1080 1920 x 1080 WUXGA 1920 x 1200 English Downloaded From projector-manual.com Optoma Manuals... - Page 50 1024 x 768 1024 x 768 1024 x 768 1280 x 720 1280 x 768 1280 x 768 1280 x 768 1280 x 800 1280 x 1024 1280 x 1024 1920 x 1080 1920 x 1200 English Downloaded From projector-manual.com Optoma Manuals...
-
Page 51: D Input Video Compatibility
Frame sequential 2D Input (include Auto apply 3D HDMI/VGA port) Mode 1024 x 768 @ 120Hz Frame sequential 2D Input (include 480i HQFS HDMI/VGA/ While 3D Format is Component/ “Frame sequential” 576i HQFS Composite port) English Downloaded From projector-manual.com Optoma Manuals... -
Page 52: Rs232 Commands And Protocol Function List
Appendices RS232 Commands and Protocol Function List RS232 Pin Assignments Pin no. Name I/O (From Projector Side) Signal Ground English Downloaded From projector-manual.com Optoma Manuals... -
Page 53: Rs232 Protocol Function List
Appendices RS232 Protocol Function List Optoma Data and HT Projectors HD33 Baud Rate 9600 Note: There is a <CR> after all ASCII commands, 0D is the HEX code for <CR> in ASCII code Data Bits Parity None Optoma Data and HT Projectors... - Page 54 ~XX121 n MI2/Component Software Version ~XX122 n Okdddd a=1/2/3/4/5/7/8/9 Cinema=1 Bright=2 Photo=3 Display Mode Reference=4 User=5 ISFDay=7 Cinema/Bright/Photos/Refer ISFNight=8 ence/User/ ISF Day/ISF 3D=9 Night/3D ~XX123 n Power State On/Off ~XX124 n a=1/0 Brightness ~XX125 n English Downloaded From projector-manual.com Optoma Manuals...
- Page 55 Rear-Ceiling Ceiling Projection Mode ~XX129 n RS232 Commands for HD33 Remote Remote Control Up/Page + n=10 ~XX140 n Left/Source n=11 Enter (for projection MENU) n=12 Right/Re-SYNC n=13 Down/Page - n=14 Menu n=20 Re-sync n=41 English Downloaded From projector-manual.com Optoma Manuals...
-
Page 56: Ceiling Mount Installation
Appendices Ceiling Mount Installation To prevent damage to your projector, please use the Optoma ceil- ing mount. If you wish to use a third party ceiling mount kit, please ensure the screws used to attached a mount to the projector met the follow-... -
Page 57: Optoma Global Offices
81-83 avenue Edouard Vaillant +33 1 41 46 94 35 92100 Boulogne Billancourt, France savoptoma@optoma.fr Spain C/ José Hierro,36 Of. 1C 28522 +34 91 499 06 06 Rivas VaciaMadrid, +34 91 670 08 32 Spain English Downloaded From projector-manual.com Optoma Manuals... - Page 58 Hong Kong Unit A, 27/F Dragon Centre, +852-2396-8968 79 Wing Hong Street, +852-2370-1222 Cheung Sha Wan, www.optoma.com.hk Kowloon, Hong Kong China 5F, No. 1205, Kaixuan Rd., +86-21-62947376 Changning District +86-21-62947375 Shanghai, 200052, China www.optoma.com.cn English Downloaded From projector-manual.com Optoma Manuals...
-
Page 59: Regulation & Safety Notices
Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque à l’intention des utilisateurs canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. English Downloaded From projector-manual.com Optoma Manuals... -
Page 60: Declaration Of Conformity For Eu Countries
R & TTE Directive 1999/5/EC (if product has RF function) Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. English Downloaded From projector-manual.com Optoma Manuals...