Data Logging Screen - Unitron Element Programming Manual

Data Logging
Screen
At the initial fitting, no data logging
information will be available. When saving to
the hearing aid(s), data logging is activated
by default.
If you do not wish to have data logging
enabled:
1. Select End Fitting from the left
navigation menu.
2. Uncheck Enabled from the Data Logging
option. This will deactivate the data
logging feature and the hearing aid will
not record data. No data logging
information will be available when the
client returns for the follow-up visit.
At the Follow-up Appointment:
Data logging information can be read from the hearing aid when the client returns for the
follow-up visit.
The following steps are recommended during the follow-up visit:
1. Connect the hearing instrument to U:fit.
2. Click Read from the Hearing Instruments.
3. Click Fitting on the left navigation menu.
If data logging information is available, the Data Logging icon will flash.
To access the hearing instrument's stored data logging information, click Data Logging on
the Fitting screen or select Data Logging from the left navigation.
Note: If new settings are saved to the hearing aid, the data logging information will be
lost. It is important to read the data logging information from the hearing aid before new
settings are saved to the hearing aid.
If you wish to print the data logging information for future reference, click Print.
If you want to save the data logging information, click Save to Database.