Olympus Stylus 810 Advanced Manual page 72

Monitor indication
CA R D S E TUP
POWER OFF
FORMAT
SET
ME MORY S E TU P
POWER OFF
MEMORY FORMAT
SET
NO CONNECTION
NO PAPER
NO INK
5
JAMMED
SETTINGS
CHANGED
PRINT ERROR
r
CANNOT PRINT
72
Possible cause
This card cannot be
used in this camera. Or,
the card is not formatted.
OK
There is an error in the
internal memory.
OK
The camera is not
connected to the printer
correctly.
There is no paper in the
printer.
The printer has run out
of ink.
The paper is jammed.
The printer's paper tray
has been removed or
the printer has been
operated while changing
settings on the camera.
There is a problem with
the printer and/or
camera.
Pictures recorded on
other cameras may not
be printed on this
camera.
Corrective action
Format the card or replace.
• Select [POWER OFF] and press o.
Insert a new card.
• Select [FORMAT]
o. All data on the card is erased.
Select [MEMORY
[YES] and press o. All
FORMAT]
data in the internal memory is
erased.
Disconnect the camera and connect
it again correctly.
Load some paper in the printer.
Replace the ink cartridge in the
printer.
Remove the jammed paper.
Do not operate the printer while
changing settings on the camera.
Turn off the camera and printer.
Check the printer and remedy any
problems before turning the power
on again.
Use a computer to print.
[YES] and press