Electrolux EWF 10240 W User Manual page 14

14 electrolux use
Select the Delay start
90’
Before you start the programme, if
you wish to delay the start, press the
Delay Start button repeatedly, to select
the desired delay. The selected delay
time value (up to 20 hours) will appear
on the display for about 3 seconds,
then the duration of the programme will
appear again.
You must select this option after you
have set the programme and before you
press the Start/Pause button.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Depress Start/Pause button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress Start/Pause button.
• Depress Start/Pause button more
times until the symbol
• Depress Start/Pause button again.
The Delay Start can not be selected
with Spin
programmes.
Downloaded From WashingMachine-Manual.com Manuals
0'
is displayed.
and Drain
Programme progress display
By selecting the wash programme, the
"wash" pilot lights comes on.
When the pilot light "wash" comes on
this means that the machine is
performing the washing cycle. If you
have selected the "prewash"
function, this light will be on during the
prewash phase too.
The "door" pilot light indicates if
the door can be opened:
• light on: the door cannot be opened.
The appliance is running.
• light off: the door can be opened.
The washing programme is finished.
• flashing light: the door is opening.
When the programme has finished, the
"End" pilot light comes on.
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the Start/Pause button.
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to "O" and
then to the new programme position.
The washing water in the tub will not
emptied out. Start the new programme
by depressing the Start/Pause button
again.