Messages - Kenwood K-521 Instruction Manual

Messages

68
K-521E_B60-5813-08_01_GVT0294-002A.indb 68 K-521E_B60-5813-08_01_GVT0294-002A.indb 68
Downloaded From Disc-Player.com Kenwood Manuals
Displayed Message
NO DISC There is no CD inserted.
RInsert a CD.
NO PGM No tracks are programmed.
RProgram the tracks you want to listen to. (See P.31)
RCancel program mode and use normal playback. (See P.32)
PGM FULL An attempt was made to program a 51st CD track.
RYou can program only up to 50 tracks. (See P.32)
NOT SUPPORT An iPod that is not supported with this device is connected. (See P.38)
NonPCM The [DIGITAL IN (OPTICAL)] terminal on the rear panel of the main unit is
receiving non-PCM input signals. (See P.13)
TRAY OPEN The CD tray is open.
RClose the tray.
UNLOCK The component connected to the [DIGITAL IN (OPTICAL)] terminal on the
rear panel of the main unit is not turned on. Alternatively, there is no signal
input.
––– kHz The sampling frequency of the input PCM signals is outside the playable
range.
There is no TAG information. (See P.23)
. . . . . . . . . . . .
K-521
Meaning
09.10.26 4:32:02 PM 09.10.26 4:32:02 PM