Handling Discs - Kenwood K-521 Instruction Manual

Important Information

Handling Discs

Hold a CD taking care not to touch the played surface.
This system can play back a CD (12 cm, 8 cm), CD-ROM,
CD-R, CD-RW or the audio part of a CD-EXTRA disc.
If the CD-ROM, CD-R or CD-RW disc being used has a
printable label surface, the label surface may cause
sticking that makes it impossible to remove the disc
from the system. To prevent malfunction of the system,
do not use such a disc.
Notes on transporting or moving the system
Before transporting or moving this unit, take the following actions:
24
K-521E_B60-5813-08_01_GVT0294-002A.indb 24 K-521E_B60-5813-08_01_GVT0294-002A.indb 24
Downloaded From Disc-Player.com Kenwood Manuals
Handling precautions
Discs playable on the system
Notes on CD-ROM/CD-R/CD-RW discs
1 Remove any CDs from the unit.
2 Press the [CDE] key and check to make sure that the message "NO DISC" appears on the display.
3 Wait a few seconds and then turn the system off .
4 If there are any other components connected to the system, check to make sure they are all turned off before
disconnecting the cables.
K-521
Cautions on CD discs
Always use a disc carrying the
A disc without this marking may be unable to be play
back correctly.
The disc rotates at a high speed during playback.
Never use a cracked, chipped or greatly warped disc.
Otherwise, damage or malfunction of the player may
result.
Also, do not use a disc with a non-circular shape as this
may result in malfunction.
marking.
09.10.26 4:31:54 PM 09.10.26 4:31:54 PM