Nokia N8-00 Service Manual page 29

37) Carefully place down the WINDOW ASSY. Make
sure that the connectors remain connected!
39) Tighten the four TORX + size 4 screws to the
torque of 13 Ncm in the order shown.
41) Push the TOP COVER into its place. Make sure that
the TOP COVER is in its place by firmly pressing on
both corners of the TOP COVER.
29
38) Press the WINDOW ASSY from both sides to get
the WINDOW FRAME FIXING SPRINGS locked.
40) Remove the protective film from the TOP COVER
and open the HDMI HATCH.
42) Tighten the TORX + size 5 screw to the torque of
11 Ncm.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia N8-00
RM-596
Service Manual Level 1&2
Version 6.0