Nokia N8-00 Service Manual page 19

37) To separate the ENGINE BOARD from the BODY
ASSY, lift up the shown side (1). Then pull the ENGINE
BOARD to the direction shown (2).
39) Remove the PROXY SENSOR BOOT with the
tweezers.
41) Turn over the SUB PWB. Be careful not to damage
the flex!
19
38) The ENGINE BOARD can now be separated.
40) Open the two clips holding the SUB PWB with the
SS-93.
42) Use the SS-93 to release the PWB SPACER ASSY. Be
careful not to damage the components nearby!
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia N8-00
RM-596
Service Manual Level 1&2
Version 6.0