Epson Stylus T20 User Manual page 2

3
Gently shake the ink cartridges, then unpack them.
4
Remove only the yellow tape from each cartridge.
5
Insert each cartridge into the correct slot for its color. Push them
down to make sure they click into place.
6
Close the ink cartridge cover and
press it down.
7
Close the printer cover.
8
Press the maintenance
button to charge the ink.
Charging takes approximately
2 minutes.
Caution: Never turn off the printer while the green
flashing or you'll waste ink.
4
1
2
Do not touch
the green
circuit board
3
4
5
power light is
Load Paper
Slide the paper support into the slot at the back of the printer.
Insert the output tray into the slot at the front of the printer.
Squeeze the left edge guide and slide it to the left.
Fan a few sheets of paper and place them against the right edge
guide. Load the printable side face-up and the short edge first
(even when printing landscape-oriented documents).
Letter or A4
Note: Do not load the paper sideways.
Squeeze the left edge guide and slide it against the paper.
4 x 6 or 5 x 7