Adding position information to images
You can add GPS tags to images that were taken while the GPS log was
saving by transferring the GPS log saved on the smartphone to the camera.
1
Before beginning to shoot, launch OI.Share and turn on the
switch on the Add Location button to begin saving the GPS log.
• Before beginning to save the GPS log, the camera must be connected to
OI.Share once to synchronize the time.
• You can use the phone or other apps while the GPS log is saving. Do not
terminate OI.Share.
2
When shooting is complete, turn off the switch on the Add
Location button.
Saving the GPS log is complete.
3
Connect the camera to a smartphone. (P. 39)
4
Transfer the saved GPS log to the camera using OI.Share.
• GPS tags are added to the images in the card based on the transferred
GPS log.
• When an error message is displayed: g "Error message during Wi-Fi
connection" (P. 39)
• Addition of location information can only be used with smartphones that have
a GPS function.
• Position information cannot be added to movies.
Changing password
Choose a new password for smartphone connections.
1
Highlight [Wi-Fi] (P. 36) in the SETUP menu and press OK.
2
Highlight [Password] and press OK.
Press the N button.
3
• A new password will be generated automatically.
41
EN