Canon LEGRIA HFM36 Instruction Manual page 150

• Estimated figures about available movie recording time and available
number of photos are approximate and based on the recording mode
and photo quality/size settings currently in use.
• In the information screen of a memory card you can also check its
Speed Class.
b
• The [Total space] shown for the built-in memory indicates actually
usable space. It may be slightly smaller than the nominal built-in mem-
ory capacity listed in the Specifications.
[x.v.Colour]:
Uses a color space with an extended gamut to achieve
deeper colors, closer to real life.
• Use this function to record video only when you intend to play back your
recordings on an HDTV compatible with x.v.Colour, connected to the
camcorder using an HDMI cable. If recordings made with x.v.Colour are
played back on a non-compatible TV, colors may not be reproduced
correctly.
[Auto Rotate]:
the camcorder on its side), will be rotated automatically and displayed
correctly during playback.
[Photo Review Time]:
recorded.
• The review time can only be set when the drive mode is set to
[A Single].
[Photo Numbering]:
new memory card. Photos are automatically assigned consecutive num-
bers from 0101 to 9900, and stored in folders containing up to 100 pho-
tos. Folders are numbered from 101 to 998.
[a Reset]: Photo numbers will restart from 101-0101 every time you
insert a new memory card.
[b Continuous]: Photo numbers will continue from the number following
that of the last photo recorded with the camcorder.
• If the memory card you insert already contains a photo with a larger
number, a new photo will be assigned a number one higher than that of
the last photo on the memory card.
• We recommend using the [b Continuous] setting.
• The photo number indicates the name and location of the file on the
memory card. For example, the file name of a photo numbered 101-
0107 is "IMG_0107.JPG", stored under the folder "DCIM\101CANON".
Downloaded From VideoCamera-Manual.com Manuals
150
Additional Information
Photos that were recorded in portrait orientation (by turning
Selects the time to display a photo after it has been
Select the photo numbering method to be used on a