Step; Idirect Username/Password For The D2 - MotoSAT D2 User Manual

D2/iDirect
Step 4: iDirect Username/Password for the D2 Cont.
| iDirect Username/Password for the D2 Cont. |
> Click Start>Run>telnet [D2's IP Address]>OK
> A prompt will appear with the DATASTORM %
> You will now need to set the username and password in the D2. The commands are:
| setvalue modemUsername admin , [hit enter]
| setvalue modemPassword [your iDirect modem password] , [hit enter]
[If your password is different please enter it here]
> Exit [Close] the telnet prompt.
> Here are a few tips on these commands:
| The commands:
- getvalue modemUsername
- getvalue modemPassword
Can be used to determine the current username and password stored in
the D2.
| These parameters are stored in Non-Volatile RAM [memory that can be
erased and written to via commands]. If ever an NVCLEAR is performed
[where the D2's Non-Volatile RAM is erased], you will need to run through
these commands again.
> Now move on to Step 5.
User Guide
v.1
6