Related Manuals for MotoSAT D2
Summary of Contents for MotoSAT D2
-
Page 2: Table Of Contents
Finding the iDirect Modem’s IP Address __ 1-2 Step 2 Configuring your Router _______________ 2-3 Step 3 Configuring the D2 ____________________4-5 Step 4 iDirect Username/Password for the D2 ____5-6 Step 5 Configuring your Computer for iDirect ____7 Step 6 Searching for the Satellite ______________ 7-8... -
Page 4: Step
D2/iDirect User Guide Step 1: Finding the iDirect modem’s IP Address Cont. | The iDirect Modem’s IP Address Cont. | > When the user name and password prompt appears: | User Name: admin | Password: [Your password is provided by your iDirect paperwork or by your iDirect ISP] >... -
Page 8: Step
> Click Start>Run>telnet [D2’s IP Address]>OK > A prompt will appear with the DATASTORM % > You will now need to set the username and password in the D2. The commands are: | setvalue modemUsername admin , [hit enter] | setvalue modemPassword [your iDirect modem password] , [hit enter] [If your password is different please enter it here]... -
Page 9: Configuring Your Computer For Idirect
Step 6: Searching for the Satellite | Searching for the Satellite | > Open your internet browser and type in the new IP address of the D2 [in this case 192.168.1.250]. > The D2’s status page will appear. There are two things you could see: | A good search screen will show a ‘0’... - Page 10 Internet has been attained. This concludes the D2/iDirect Guide. For additional help on connecting to the Internet or other Internet related questions, contact your iDirect ISP MotoSAT | www.motosat.com | 1-800-247-7486 © MOTOSAT 2005 | ALL RIGHTS RESERVED...