Advertisement
D2/iDirect
Step 6: Searching for the Satellite Cont.
| Searching for the Satellite Cont. |
> After confirming the system status readings you need to make sure the
status buttons read good for a satellite search:
LNB
> The LNB, LAN, GPS, and STOW* lights should be lit.
*[Stow can only be lit if a stow operation has been done.]
> With all these criteria met you can now click 'Search' .
> During a search, signal quality will read '0' . If you see ANY signal quality,
you're on the right satellite and the DataStorm will peak accordingly with
typical high signal quality.
> When the DataStorm has finished peaking, the system status will read
'Search Operation Completed' and the 'Ready' light will be lit. This indicates
that a connection to the Internet has been attained.
For additional help on connecting to the Internet
or other Internet related questions, contact your iDirect ISP
MotoSAT | www.motosat.com | 1-800-247-7486
User Guide
LAN
GPS
This concludes the D2/iDirect Guide.
© MOTOSAT 2005 | ALL RIGHTS RESERVED
READY
BUSY
v.1
STOW
8
Advertisement
