Factory Default Settings - NETGEAR C6300 User Manual

Factory Default Settings

To return the modem router to its factory settings, press and hold the Reset button for over
seven seconds. The modem router resets and returns to the factory configuration settings
shown in the following table.
Table 4. Factory default settings
Feature
Modem router User login URL
login
User name and password
(case-sensitive)
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP starting IP address
DHCP ending IP address
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
Internet WAN MAC address
connection
Wireless Wireless communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
Operating mode
Data rate
Output power
Access point
AC1750 WiFi Cable Modem Router
Default Setting
http://192.168.0.1
admin / password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address
Enabled
As shown on the product label
WPA/WPA2. The default WPA/WPA2 passphrase is
on the product label.
Enabled
1
Auto
United States in the US; otherwise, varies by region
Auto
a, n, g, b, and ac
Best
Full
Enabled
Supplemental Information
101