Unpacking And Checking Contents - Makita SJ401 Instruction Manual

Unpacking and Checking Contents

TOOLS NEEDED FOR ASSEMBLY
COMBINATION SQUARE MUST BE TRUE
Medium Screwdriver
Combination square
WARNING:
To avoid injury from unexpected starting or electrical shock,
do not plug the saw in until all assembly and alignment
steps are complete. The power cord must remain
unplugged whenever you are woking on the saw.
B
C
4
Phillips Screwdriver
10 mm Wrench
Hose
C C
1 2
C
3
Draw Light Line On Board Along This Edge
Should Be NO Gap Or Overlap Here When Square
ls Flipped Over In Dotted Position
The scroll saw is shipped complete in one carton.
Separate all parts from packing materials and check each item with
illustration and "Table of Loose Parts". Make certain all items are
accounted for, before discarding any packing material.
NOTE:
Insert the hose to air diaphragm before starting.
WARNING:
If any parts are missing, do not try to assemble the scroll
saw, plug in the power cord or turn the switch on until the
missing parts are obtained and installed correctly.
ITEM TABLE OF LOOSE PARTS
A Basic saw assembly
B Owners Manual
Loose Parts Bag
C
Containing the following parts:
C Blade Change Rod
1
C Hex Wrench "L"
2
C Saw blade
3
Straight Edge of Board 20 mm Thick, This
Edge Must be Perfectly Straight.
QTY
1
1
1
1
6