Sony MHC-S90D Operating Instructions Manual page 35

** The letters in the program format display mean the
following sound component:
L:
R:
C:
LS:
RS:
S:
LFE: LFE (Low Frequency Effect)
The display examples are as follows:
• PCM (stereo)
• Dolby Surround
• Dolby Digital 5.1ch
When an LFE signal component is output,
"LFE" is enclosed in a solid line. When an LFE
signal component is not output, "LFE" is
enclosed in a broken line.
Downloaded From DvDPlayer-Manual.com Sherwood Manuals
Front (left)
Front (right)
Center
Rear (left)
Rear (right)
Rear (monaural): The rear component of the
Dolby Surround processed signal or the
Dolby Digital signal.
PROGRAM FORMAT
PCM 48kHz 24bit
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
L C R
S
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L C R
LFE
LS RS
• DTS
"LFE" is always enclosed in a solid line
regardless of the LFE signal component being
output.
PROGRAM FORMAT
DTS 3/2.1
L C R
LFE
LS RS
Note
When the signal contains rear signal components such
as LS, RS, or S, the Surround effect is enhanced
(page 48).
MHC-S90D 4-235-983-43(2) GB
GB
35