Technical Data - Bosch GBH 2-24 DFR Original Instructions Manual

Technical Data

Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated power input
Output power
Impact rate
Impact energy per
stroke
Rated speed
– Right rotation
– Left rotation
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork
(with core bit)
– Steel
– Wood
Weight according
to EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.
Bosch Power Tools
GBH 2-24 DFR
Professional
0 611 238 7..
W 680
W 390
0 – 4850
bpm
J 2.4
0 – 870
rpm
rpm 0 – 500
SDS-plus
mm 43 (Euro-
Norm)
mm 24
mm 68
mm 13
mm 30
kg 2.9
/ II
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
23.07.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Auxiliary Handle
Operate your machine only with the auxi-
liary handle 13.
Rotating the Auxiliary Handle (see figure A)
The auxiliary handle 13 can be set to any posi-
tion for a secure and low-fatigue working pos-
ture.
Turn the bottom part of the auxiliary handle 13
in counterclockwise direction and swivel the
auxiliary handle 13 to the desired position. Then
retighten the bottom part of the auxiliary handle
13 by turning in clockwise direction.
English | 19
Dr. Eckerhard Strötgen
Head of Product
Certification
1 619 929 739 | (2.8.07)