Technical Data - Bosch Professional GBH 18V-26 Manual

OBJ_DOKU-61647-001.fm Page 4 Wednesday, August 2, 2017 10:03 AM
30 Retaining ring of the quick change keyless chuck
(GBH 18V-26 F)
31 Universal bit holder with SDS-plus shank*

Technical Data

Rotary Hammer
Article number
Speed control
Stop rotation
Right/left rotation
Quick change chuck
Rated voltage
Rated power input
Impact rate
Impact energy per stroke according to
EPTA-Procedure 05/2009
Rated speed
– Right rotation
– Left rotation
Tool holder
Spindle collar diameter
Drilling diameter, max.:
– Concrete
– Brickwork (with core bit)
– Steel
– Wood
Weight according to EPTA-Procedure 01:2014
Length
Height
Permitted ambient temperature
– during charging
*
– during operation and during storage
Recommended batteries
Recommended chargers
* limited performance at temperatures <0 °C
Technical data determined with battery from delivery scope.
Assembly
 Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre
position. Unintentional actuation of the On/Off switch can
lead to injuries.
Battery Charging (see figure A)
 Use only the battery chargers listed on the accessories
page. Only these battery chargers are matched to the lith-
ium-ion battery of your power tool.
Bosch Power Tools
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GBH 18V-26
3 611 J09 0..



–
V= 18
W 425
-1
min 0–4350
J 2.6
min-1 0–890
-1
min 0–890
SDS-plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 3.0–3.5
mm 347
mm 225
°C
0...+45
°C –20...+50
GBA 18V ...
AL 18..CV
GAL 3680..
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the Electronic Cell Protection (ECP). When the battery is
empty, the machine is switched off by means of a protective
circuit: The inserted tool no longer rotates.
 Do not continue to press the On/Off switch after the
machine has been automatically switched off. The bat-
tery can be damaged.
English | 4
GBH 18V-26 F
3 611 J10 ...




18
425
0–4350
2.6
0–890
0–890
SDS-plus
50
26
68
13
30
3.3–3.8
378
225
0...+45
–20...+50
GBA 18V ...
AL 18..CV
GAL 3680..
1 609 92A 3YU | (2.8.17)