Figure 1-1 Appearance Of The Mediapad 10 Fhd - Huawei MediaPad 10 fhd Maintenance Manual

MediaPad10 FHD Maintenance Manual
The entire device has five antennas: one host antenna, one diversity antenna, one GPS antenna,
one antenna for the Bluetooth and Wi-Fi modules, and one independent antenna for the
synthetic aperture radar (SAR) sensor.
The smart chip MAX8903 is used for charging management, the Broadcom BCM4330 chip is
used for the Wi-Fi and Bluetooth modules, and the BCM47511 chip is used for the GPS
module.
The MediaPad 10 FHD has the following memory features:
l
AP RAM: LP DDR2, standard 1 GB 533 Hz (compatible with 2 GB)
l
AP ROM: eMMC, standard 8 GB (compatible with 16 GB and 32 GB)
l
Modem: Hi6920+Hi6451+Hi6360, MCP (NAND+DDR), standard 2 Gbit + 1 Gbit
(compatible with 1 Gbit + 512 Mbit)
The MediaPad 10 FHD supports the 3.5 mm headset jack and 30-pin dock interface. The dock
interface supports multiple functions, such as charging, power supply, USB host or device
installation, and the display port.
Figure 1-1 shows the appearance of the MediaPad 10 FHD.

Figure 1-1 Appearance of the MediaPad 10 FHD

Figure 1-2 shows the hardware principles of the MediaPad 10 FHD (Hi3620+Hi6920).
2012-10-09 Huawei Confidential
INTERNAL
Page 9 of 78