Fog Lights; Turn And Lane-Change Signals - Mazda CX-3 Manual

When Driving
Switches and Controls

Fog Lights

The fog lights can be used when the
ignition is switched ON.
Use this switch to turn on the fog lights.
The fog lights will improve visibility at
night and during foggy conditions.
The fog lights turn on when the fog light
switch is turned to the
off when the switch is turned to the
position.
The fog lights turn on when the headlights
are turned on. They will not turn on if the
headlight switch is in the
position.
Fog light switch
NOTE
The fog lights will turn off when the
headlights are set at high beams.
(With auto-light control)
If the fog light switch is in the
position and the headlight switch is in
the position, the fog lights will
turn on when the headlights, the
exterior lights and dashboard
illumination turn on.
4–46
*Some models.
*
position and turn
position or
Turn and Lane-Change
Signals
The ignition must be switched ON to use
the turn and lane-change signals.
Turn Signals
Move the signal lever down (for a left
turn) or up (for a right turn) to the stop
position. The signal will self-cancel after
the turn is completed.
If the indicator light continues to ash
after a turn, manually return the lever to its
original position.
The turn signal indicators in the instrument
cluster ash according to the operation of
the turn signal lever to show which signal
is working.
Right turn
Right lane change
OFF
Left lane change
Left turn