System Requirements; Battery Installation - Sharp WA-ST20(BK)/(W) Operation Manual

System requirements

The following hardware and software are required to transfer audio
data from a PC to the unit.
Hardware and software requirements *1
Computer IBM PC/AT-compatible
OS Microsoft
Millennium Edition/2000 Professional/XP
Professional/XP Home Edition standard
installation *2, Mac OSX 10.2.6 above
Software Windows Media
Drive CD-ROM drive
Interface Available USB port (USB 2.0/1.1)
*1 Operation is not guaranteed on all the compatible computers.
*2 Operation is not guaranteed on computers running upgraded OS
or multiple OS with dual-boot.
Downloaded from ManualMPlayer.com Manuals
® ®
Windows 98 Second Edition/
®
Player 9 Series or 10

Battery installation

■ Storing the unit
1 Open the battery cover.
2 Insert the "AAA" battery according to the direction indicated
in the battery compartment.
When inserting or removing the battery, push them towards the
battery terminal.
3 Close the battery cover.
Battery AAA
Notes:
● Be sure to turn off the MP3 player before inserting or removing the
SD/MMC card.
If the set is on, removing or inserting the SD/MMC card can cause
some data to be lost or the set to freeze or become inoperative. If
this should be happen, please take out the battery for a whilst,
insert it and restart the unit.
● Installing the battery incorrectly may cause the unit to malfunction.
● Remove the battery if the unit will not be used for long periods of
time. This will prevent potential damage due to battery leakage.
● Replace the battery when it become weak and/or recording or
playback is impaired.
● Do not use rechargeable battery (nickel-cadmium battery, etc.).
● Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
● Battery is not included.
WA-ST20(BK)/(W)
WA-ST200(BK)/(W)
ENGLISH
Battery Cover
SD/MMC Card
E-5