Sharp WA-ST20(BK)/(W) Operation Manual page 12

Ripping tracks from audio CD to PC
WA-ST20(BK)/(W)
WA-ST200(BK)/(W)
(continued)
ENGLISH
■ For Windows Media Player 10
1
Launch Windows Media Player.
Example:
Start → All Programs → Windows Media Player
2
On the "Tools" menu, click "Options..." and then "Rip
Music" and select "Copy protect music".
3
Click "OK".
4
Insert an audio CD into the PC.
The audio CD may play automatically depending on settings on
the PC. In this case, stop playback.
5
Click "Rip" on the taskbar to show tracks on the audio CD.
6
Select the check boxes of tracks to rip.
7
Click "Rip Music" to start ripping.
Notes:
● For details on Windows Media Player, refer to its Users Guide.
● If the PC is connected to the internet, information (artist or album
name, title, genre, etc.) appears. Information may not be available
depending on the audio CD.
Downloaded from ManualMPlayer.com Manuals
E-10
Transfering Audio data from PC to
the unit
■ Folder
When using Windows Media Player 9 series, select the
"MUSIC" folder to transfer the audio data.
Note:
You need to create Music Folder. Create them in the level indicated
in "About folder tree".
When using Windows Media Player 10, subfolders with an
artist or album name are automatically created in the "MUSIC"
folder.
Note:
To create subfolders with an artist or album name automatically,
click ( ) to display properties and select "Create folder hierarchy
on device".
About folder tree
Flash
VOICE
FM
MUSIC
Data recorded with microphone.
Recorded FM Radio programmes.
Music data copy from PC.
Click this to display properties