Playing Selected Data - Sharp WA-ST20(BK)/(W) Operation Manual

Playing selected data (continued)
WA-ST20(BK)/(W)
WA-ST200(BK)/(W)
■ Equaliser setting
ENGLISH
Whilst stop or play mode, press the EQ button repeatly until the
desired sound mode appears.
NOR
(Normal)
Alternative method to change sound mode.
1
Press /
2
Hold down the Menu button for 1
second or more.
3
Within 20 seconds, press
button to select "Settings" and press
Menu button.
4
Within 20 seconds, press
button to select "Eq" and press Menu
button.
5
Within 20 seconds, press
button to select an equaliser setting,
press Menu button.
(*)Normal : The sound is not modified
Rock : For rock music
Pop : For pop music
Jazz : For jazz
Custom : Sound quality can be customise (see page 16)
● The setting is completed.
● The playback screen returns after 20 seconds.
Note:
Distortion may occur depending on the equaliser setting.
In this case, change the type or turn down the volume.
Downloaded from ManualMPlayer.com Manuals (*) indicates default setting
E-16
ROCK POP JAZZ CUST
(Custom)
button to turn the power on.
or
Main Menu
or
or
■ Customising sound quality
1
Perform step 1 - 4 on page 16.
2
Within 20 seconds, press
button to select "Custom" and press
Menu button.
3
Within 20 seconds, press
frequency and press
Main Menu
80Hz:
Navigator
FM Radio
250Hz:
Voice Record
1000Hz:
4000Hz:
12000Hz: Treble setting
Settings
Del Files
4
Within 20 seconds, press Volume
About
(– or +) button to increase or
Settings
decrease the gain level.
Playmode
Eq
Contrast
5
Repeat steps 3 and 4 to adjust each frequency.
6
EQ Within 20 seconds, press Menu button.
Rock
● The setting is completed.
● The playback screen returns after 20 seconds.
Note:
The "Custom" settings will remain in the memory even after you
switch to another equaliser mode.
or
or button to select the
button.
Bass setting
Custom
Midrange setting
dB 0.0
Custom
dB -6.5
EQ
Custom
1000Hz
1000Hz