Power Switch; Fp Flash Button - Canon SPEEDLITE 220EX Instructions Manual

Power Switch

E-TTL H
PILOT
Set the power switch as follows:
: To turn off the power.
: To turn on the power. If the Speedlite
220EX is left unused for about 90 sec., it
turns off automatically to save battery
power. To turn on the Speedlite 220EX
again, press the shutter button or press the
test firing button.

FP Flash Button

E-TTL H
PILOT
Press the FP flash button to set to high-speed
sync which enables the Speedlite 220EX to syn-
chronize with all shutter speeds. The FP flash indi-
cator will light.
To cancel FP flash, press the FP flash button
again.
• When the Speedlite 220EX is used with Type A cameras
and the FP flash button is set to high-speed sync, using a
shutter speed faster than the camera maximum sync
speed sets the high-speed sync mode. Likewise, using a
shutter speed equal to or slower than the camera maxi-
mum sync speed sets to the normal sync mode.
• When the Speedlite 220EX is used with Type B cameras,
the normal sync mode is set regardless of the FP flash
button setting.
Before
You
Start
9