Playback Functions; Single-Frame/Close-Up Playback - Olympus E-620 Instruction Manual

6

Playback functions

Single-frame/Close-up playback

The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to
automatically switch to single-frame playback mode after shooting. g"REC VIEW" (P. 93)
1
Press the q button (Single-frame playback).
• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no
operations are performed. The camera will turn off
automatically if there is no operation after 4 hours. Turn
on the camera again.
2
Use p to select images you want to view. You can
also turn the control dial to switch to U for close-
up playback.
(Single-frame playback)
6
[4032x3024,1/8] [4032x3024,1/8]
2009.03.16 2009.03.16 21:56 21:56
f : Displays the frame that is
stored 10 frames back
g : Displays the frame that is
stored 10 frames ahead
i : Displays the next frame
h : Displays the previous frame
Press the < button
• Plays back the image at a
10× magnified close-up
position.
• To exit the playback mode, press the
q button again.
• Pressing the shutter button halfway
resumes the shooting mode.
82
EN
G
L N
N
100-0015 100-0015
15 15
Press the INFO button
Press the INFO button
(Close-up frame-by-frame playback)
U
(Close-up playback)
(Close-up position playback)
< button
INFO button
q button
Press p to change the
close-up position.
Press p to move the display
of the close-up position.
When [g FACE DETECT]
(gP. 39) is set to [ON], a
frame is displayed around a
detected face. Press i to
move the frame to another
face.
Press hi to view frame-by-
frame close-ups.
When [g FACE DETECT]
is set to [ON], press fg
to move to another face in
close-up position.
• Press the INFO button to
15 15 15
return to close-up
playback.
j
p