Resetting To The Factory Default Settings - Olympus E-520 Instruction Manual

Resetting to the factory default settings

Normally, current camera settings (including any changes you have made) are retained when
the power is turned off. To reset the camera to the factory default settings, set [RESET]. You
can register settings in advance to [RESET1] and [RESET2]. The camera settings at that
time are registered in [RESET1] and [RESET2]. For details on the registered functions, refer
to "Functions that can be registered with My Mode and Custom Reset Setting" (gP. 129).
Registering [RESET1]/[RESET2]
1
Menu
1
Select either [RESET1]/[RESET2] to register and press d.
• If settings have already been registered, [SET] is displayed next to [RESET1]/[RESET2].
Selecting [SET] again overwrites the registered setting.
• To cancel the registration, select [RESET].
2
Select [SET] and press the i button.
Using reset settings
You can reset the camera to [RESET1] or [RESET2] setting or restore the factory default
settings.
[RESET]
[RESET1]/[RESET2] : Resets to the registered settings.
Menu
1
Select [RESET], [RESET1] , or [RESET2] and press
the i button.
2
Use ac to select [YES], then press the i
button.
30
EN
MENU [W] [CUSTOM RESET]
: Resets to the factory default settings. For the default settings, see
"Menu directory" (gP. 130).
MENU [W] [CUSTOM RESET]
RESET1
YES
NO
CANCEL SELECT GO