Philips S95XX User Manual page 16

ENGLISH
16
3 Place the shaver in the holder (1), tilt the shaver backwards (2)
and press down the top cap to connect the shaver ('click') (3).
The battery symbol starts to flash, which indicates that the shaver
,
is charging.
4 Press the on/off button on the SmartClean system to start the
cleaning program.
During the rinsing phase, the rinsing symbol will flash.
,
Note: The rinsing phase takes approx. 10 minutes.
During the drying phase, the drying symbol will flash.
,
Note: The drying phase takes approx. 4 hours.
, When the cleaning program has been completed, the ready symbol
lights up continuously.
The battery symbol lights up continuously to indicate that the shaver
,
is fully charged.
Note: Charging takes approx. 1 hour.
Note: If you press the on/off button of the SmartClean system during the
cleaning program, the program aborts. In this case, the rinsing or drying symbol
stops flashing.
Note: If you remove the adapter from the wall socket during the cleaning
program, the program aborts.
Note: 30 minutes after the cleaning program and charging have been
completed, the SmartClean switches off automatically.