ATTO Technology iPBridge 1550E Specification Sheet page 2

iPBridge
Appliance
Gigabit Ethernet and SCSI
Gigabit Ethernet Interface
SCSI Interface
Management
Operating Environment
Local and Network Management
Agency Approvals
Safety and Environmental
Environmental & Physical Specifications
Configuration
Dimensions
Operating Environment
Power
Weight
Ordering Information
Model Number
Technical Specification
TM
iPBridge 1550E
©2008 ATTO Technology, Inc. Specifications subject to change without notice
TM 1550E
•
10/100/1000 Gig-E RJ45 Ethernet port
•
Supports IP v.4
•
Compliance with IEEE802.3ab Gig-E
•
Compliance with IEEE 802.3x Flow Control
•
SNMP MIB 2 support
•
Supports 9K Jumbo Ethernet frames
•
Single 68-pin SCSI connector
•
Ultra320 LVD SCSI—320 MB/sec. maximum throughput
•
Backward compatible with all single-ended SCSI devices
•
Supports SCSI-3 specifications
•
Operating system independent
•
Supports all SCSI devices including hard disk drives, tape drives, RAID controller, DVD, MO and CD libraries
•
TM
ExpressNAV integrated management console for remote configuration, management and diagnostic
capabilities
•
Command line management access via Ethernet and RS232
•
Local diagnostics supported through SNMP, Telnet, and FTP
•
Includes support for DHCP, ICMP, and RMON
•
Built in memory has ECC detection and correction
•
User accessible reset switch
•
Built-in watchdog timer
•
Automatically detects and maps all connected devices at power on
•
RoHS Compliant
•
Embedded Board
•
Embedded Board: 4.4" W x 6.4" L
•
Temperature: 5-40° C
•
Humidity: 10-90% non-condensing
•
Standard 4 pin power connector, 12V, 1.5A
•
Nominal power consumption: 1A @ 12V
•
1.5 lbs
•
IPBR-1550-ER0
Power Behind the Storage
For More Information:
www.ATTOTech.com
or to Purchase:
www.ATTOStore.com
(716) 691-1999
Rev 1/08