Ntp; Controller; Update - LG LRN8240D Series Owner's Manual

28 Installation

NTP

3
• NTP: Marks up, if you want to synchronize the system's date and
time with those of the time server called NTP. (Network Time
Protocol) Specify the NTP server's name.
• Time Server: For most cases select public. The system will obtain
the average time among 5 public servers (time.nist.gov, time-a.
nist.gov, time-b.nist.gov, ntp.nasa.gov, clock.isc.org).
• Private Time Server: Enter the private time server's IP address or
host name using the virtual keyboard.
• Sync. Interval: You can set synchronized intervals with the NTP
time server to 1 day, 1 week, 1 month and 1 hour.
• NTP Test: Select [NTP Test] to test the NTP server.
NOTE
If the NTP option is not set to this system, there can be a
gap between the system time and actual time. Using NTP is
recommended.

Controller

• IR Remote ID: Select the IR Remote ID for this unit. If you use
multi systems set the IR Remote ID for each unit.
• Remote Controller ID: Select the Remote Controller ID for this
unit. If you use multi systems, set the Remote Controller ID for
each unit. You can control the system by using the LKD1000
controller. (For more details refer to the LKD1000 owner's
manual.)

Update

This function is aimed at upgrade the system software. In this case,
the current system settings are not deleted or replaced during the
update process.
1. Selects the update method.
2. Selects the device included update file or enter the FTP server
name.
NOTE
If you select the update method to [LOCAL], the [FTP Server]
option will be disabled and the [Device] option is activated.
And if you select update method to [NETWORK], the [Device]
option will be disabled and [FTP Server] option is activated.
3. Select the [Search] button and press OK. The update file is
displayed in the list.
4. Choose the update file from the list.
5. Select the [Update] button and press OK. The confirmation
window is displayed.
6. Select [OK] to begin the update process or click [Cancel] to stop
and exit. After the update process is completed, the [Restart the
system] message appears.
7. Click [OK] to restart the system.
NOTE
• Do not turn the power off during the update process to
prevent the malfunction.
• Do not remove the external device or CD/DVD disc for update
whilst the update is in progress. It may cause a malfunction.