Black & Decker ST4500 Instruction Manua page 5

DO NOT INSERT THE ENDS OF
THE EDGE GUIDE I NTO THE
FAN HOLES A SSHOWN I N
FIGURE 2A.
4. Remove theguard attachment
screw from theguard. Slip the
guard onto thetrimmer housing
andlineup t hescrew hole inthe
guard with thescrew hole inthe
housing (figure 3}.
5. Insert the guard a ttachment screw
tosecure t he guard i nplace a s
shown i nfigure 4.
6. Attach e xtension cord tocord
retainer asshown i n
figures 5 & 6.
OPERATING INSTRUCTIONS FOR CATALOG # ST4500
BUMP FEED TRIMMER
LINE FEED
Your trimmer uses .065 in. (1.65 mm) diameter, ROUND nylon line
to cut grass and weeds quickly and easily. Cutting line will wear
faster and require more feeding if the cutting or edging is done
along sidewalks or other abrasive surfaces or heavier weeds are
being cut. As you use the trimmer, the string will get shorter due to
wear. Gently bump the unit on the ground and the line will feed.
z_CAUTION: ALWAYS USEEYEPROTECTION.